|
yeah kurt spill the beans man, dont make me tell the guys about your poop story... :eek:
|
Originally Posted by Chris Sunkin
(Post 2355615)
Is the III conversion a TBA thing? I was unaware there was any activity on this product. Pics/specs?
|
Konrads are the answer. a replacement drive to bolt right to your existing Gimbal is less than $10,000 new with warrenty.
Just a note been building drives for over 35 years. Done lots of different coatings. Coating does not change the strength of a gear. It only helps with break-in. Hardness is what helps with strength. |
I had TRS on my 38 and the 3 blades were crap. No low end and bad out of the water. 4 blades worked better. Also, what power are you running? Up to 500 or 600 HP without blowers, TRS will hold up if maintained. Konrads are interesting, however, as noted above they are expensive as a swap over from TRS or even 3's if you consider their price in ratio of the cost of the boats that they are going on.
|
Originally Posted by Chris Sunkin
(Post 2352940)
I've come to the conclusion that the best TRS mod is the Konrad.
I was trying to convince myself this was just a second boat and I didn't want to go overboard. Having missed 2 seasons with a stalled boat project, the thought of missing a 3rd due to a broken drive and searching for NLA parts in the end was just un-appealing. Especially considering the decent boating season up here is about 90 days and half of those weekends it's raining. Plus, now I can mount the blowers on the motors and still sleep soundly.:) Thanks all for the input! |
Originally Posted by Panther
(Post 3032847)
How's the boat running with the Konrads today?
Kurt |
| All times are GMT -5. The time now is 10:45 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.