Oildyne Trim Pump Question
07-31-2008 | 11:31 AM
#1
Thread Starter
Registered
Joined: Nov 2003
Posts: 2,503
Likes: 149
From: Cape Coral, FL
Oildyne Trim Pump Question
My 1998 2.5 ROS trim system looses pressure after time. The system uses the Oildyne trim pump. I switched the current pump with the other pump in the boat and it seems to be holding pressure. So, the problem is somewhere inside the old pump.
Are the Oildyne pumps rebuildable? What normally casues the pump to go bad? Is it just a couple of orings that go bad?
Any help would be great!
Thanks!
Don
Are the Oildyne pumps rebuildable? What normally casues the pump to go bad? Is it just a couple of orings that go bad?
Any help would be great!
Thanks!
Don
07-31-2008 | 11:50 AM
#2
Registered
Joined: May 2008
Posts: 186
Likes: 1
From: Wichita, KS
Not sure if this will help but here is an oildyne service manuel pdf I found...
www.boatfix.com/merc/Servmanl/11/11a5r5x.pdf
www.boatfix.com/merc/Servmanl/11/11a5r5x.pdf
Thread
Thread Starter
Forum
Replies
Last Post
ratman
General Boating Discussion
10
04-16-2006 11:32 AM
ratman
General Boating Discussion
5
01-26-2006 07:48 PM
