Nose Cone Installation On Bravo X1
07-09-2009 | 03:02 PM
#2
Registered
Joined: Mar 2009
Posts: 1,758
Likes: 3
From: OFallon,Mo.
http://www.bobsmachine.com/
This might give you some help.I believe it's about $450 if they install it.I believe all it takes is epoxying it on and drilling and tapping a couple holes.
This might give you some help.I believe it's about $450 if they install it.I believe all it takes is epoxying it on and drilling and tapping a couple holes.
Last edited by picklenjim; 07-09-2009 at 03:06 PM.
07-09-2009 | 06:27 PM
#3
Thread Starter
Gold Member
Joined: Sep 2005
Posts: 1,987
Likes: 0
From: Missouri
http://www.bobsmachine.com/
This might give you some help.I believe it's about $450 if they install it.I believe all it takes is epoxying it on and drilling and tapping a couple holes.
This might give you some help.I believe it's about $450 if they install it.I believe all it takes is epoxying it on and drilling and tapping a couple holes.
