![]() |
Wanted: 1991 Bravo 1 Clutches
I am looking to locate clutches for twin 1991 Bravo 1 drives new or most likely used in good condition. I was told that I would need a entire gear set because the clutch for my model is no longer made and you need to replace the entire upper gear set. So does any one know where I might find clutches for my 1991 Bravo 1's??
Thanks |
Is a 1993 upper gear set the same? If so I can help you.
|
Originally Posted by Harvey
(Post 2920540)
Is a 1993 upper gear set the same? If so I can help you.
|
The 93 should be the same as the 91. I think they made the change around 2000 or so. Each of you measure the height of the cone and that will tell you. The newer ones are shorter because the floor of the newer gears are thicker.
The earlier drives, 88-89 have a different shift fork also. If you compare them you can tell if you have the same items and Havey can help you.. My guess is they are the same. Hope this helps Dick |
Originally Posted by Harvey
(Post 2920540)
Is a 1993 upper gear set the same? If so I can help you.
Thanks |
Upgrade to a newer clutch. You will need the newer shift fork as well. The shifting will improve as well. For better results install Merc s new drive cable. Shift with 2 fingers
|
Shift forks changed to newest style around 1997. I have 2 sets
|
I have the full set, they are 1.5 to 1. Ialso have the shift fort. Give me a call 252-339-4560. It's easier to explain all I have.
|
Hello we have 3 good used ones in stock call Doller offshore at 954-237-0332 Julio
|
2 used ones here low hours complete set 1;65 ration but will part out if needed p.m. me for more iinfo
|
| All times are GMT -5. The time now is 11:01 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.