|
New drive , question about XR hub
Just changed over from Bravo I to XZ drive, got an XR/XZ hub but putting on the prop theres a good 1/4" slop between the prop and nut.
What am I missing? thanx |
Probably the bellvue washers that go between the prop & nut. There shold be 2 of them that are dished. ;) Jamie / Lakeside
|
My hub has 3 washers 2 large previous post and one thinner one that goes on last. Check mercrusier parts, should have a photo break down of the parts. If the link works check item #40 http://www.mercruiserparts.com/Show_...One+XR%2FXZ%29
|
Originally Posted by Hot Stepper
(Post 2946330)
My hub has 3 washers 2 large previous post and one thinner one that goes on last. Check mercrusier parts, should have a photo break down of the parts. If the link works check item #40 http://www.mercruiserparts.com/Show_...One+XR%2FXZ%29
A few washers $50 :eek:, I`m starting to find out anything for a boat and they want your first born. Just payed $50 for a $5 exhaust gasket. :lolhit: |
Correct sequence is Large thick washer,concave washer then the smaller flat.
|
| All times are GMT -5. The time now is 12:47 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.