New drive , question about XR hub
09-03-2009 | 09:12 PM
#1
Thread Starter
Registered
Joined: Jun 2009
Posts: 9,973
Likes: 6,467
From: Chicago
New drive , question about XR hub
Just changed over from Bravo I to XZ drive, got an XR/XZ hub but putting on the prop theres a good 1/4" slop between the prop and nut.
What am I missing?
thanx
What am I missing?
thanx
09-04-2009 | 06:45 AM
#2
Lakeside Restorations.com
Joined: Nov 2003
Posts: 2,512
Likes: 2
From: NorthEastern, PA
Probably the bellvue washers that go between the prop & nut. There shold be 2 of them that are dished. 
Jamie / Lakeside
Jamie / Lakeside
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
09-04-2009 | 07:09 AM
#3
Registered
Joined: Jul 2007
Posts: 527
Likes: 0
From: Lapeer, Mi
My hub has 3 washers 2 large previous post and one thinner one that goes on last. Check mercrusier parts, should have a photo break down of the parts. If the link works check item #40 http://www.mercruiserparts.com/Show_...One+XR%2FXZ%29
Last edited by Hot Stepper; 09-04-2009 at 07:18 AM.
09-04-2009 | 09:03 AM
#4
Thread Starter
Registered
Joined: Jun 2009
Posts: 9,973
Likes: 6,467
From: Chicago
My hub has 3 washers 2 large previous post and one thinner one that goes on last. Check mercrusier parts, should have a photo break down of the parts. If the link works check item #40 http://www.mercruiserparts.com/Show_...One+XR%2FXZ%29
A few washers $50
, I`m starting to find out anything for a boat and they want your first born. Just payed $50 for a $5 exhaust gasket. 
