![]() |
question about rotation trs velvet combo
i have a single engine pantera 24'. i'm new to the velvet trans and it's rotation. i've broke a few RH trs drives with the old motor. now i went with less motor and can only find LH drives. outside of having to change props how well will a LH drive work with my set up? how well will this boat handel in a single engine app? i've been told the rotation changes in the velvet as for how the boat will handel with a LH drive i have no idea. anyone done this swap? how does the boat handel?
|
Rotation is in the drive. You must run the transmission in forward.
I doubt if you will notice a differance in handling. The RH drive is more common, you should be able to find one. We have a rebuilt in stock (just in case :). |
I swapped a few of these over the years for customers and they all worked fine. No difference in handling and a little bit stronger drive. I did one a few years back to a Konrad and that was the best of all.
|
Originally Posted by Lofty
(Post 3002977)
I swapped a few of these over the years for customers and they all worked fine. No difference in handling and a little bit stronger drive. I did one a few years back to a Konrad and that was the best of all.
|
| All times are GMT -5. The time now is 06:28 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.