Offshoreonly.com - bravo 1 to xr's what is needed to install

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - bravo 1 to xr's what is needed to install (https://www.offshoreonly.com/forums/drives-lower-units/231938-bravo-1-xrs-what-needed-install.html)

wild mike

06-03-2010 10:24 PM

bravo 1 to xr's what is needed to install

curently have bravo one, what is needed to swap the drive with an xr drive

wild mike

06-03-2010 10:26 PM

Quote:

Originally Posted by wild mike (Post 3126794)

curently have bravo one, what is needed to swap the drive with an xr drive

do i need a larger shaft input

JaayTeee

06-04-2010 12:29 PM

The red dot gimbal bearing ( it's thinner, allows
the use of the longer u-joint assy)

They also have trim cylinder spacers to limit
max tilt height, but that wont prevent you from installing
the drive to the bell housing.

LAKESIDE RESTORATIONS

06-05-2010 08:58 AM

Depending on what year transom assembly you have you may need a gimble bearing kit mentioned earlier.. :)

All times are GMT -5. The time now is 08:01 AM.