Bravo gear part numbers?
#1
Registered
Thread Starter
Join Date: Jul 2004
Location: Hobe Sound, FL
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Bravo gear part numbers?
I've been trying to put a bravo together yesterday on to find that I accidently assembled the wrong gears in the clutch assembly. One is the standard 32 tooth, the other is a 28 tooth. Part number on the 28 tooth is confusing. Anyone have info on this? Did the xrs use a 28 tooth? Wondering if the previous owner of the drive swapped some gears around.
#2
VIP Member
VIP Member
A 32 tooth driven gear is for a 1.5 ratio.
Didn't see anything listed in the book for a 28 tooth
count gear.
XR's use a 16/19 tooth count strait gear.
Didn't see anything listed in the book for a 28 tooth
count gear.
XR's use a 16/19 tooth count strait gear.
#3
Registered
Thread Starter
Join Date: Jul 2004
Location: Hobe Sound, FL
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply. I didn't find anything on a 28 tooth either...29, but not 28. Strange. I think i'll stick to the standard 32. Anyone have a spare from a blown drive?