guys new to the site. Can anyone help me identify this drive cutout? I was told it is a TRS.



Thanks
Mike

TRS has a similar cut out but that gimble housing shape left on the transom doesn't look familiar to me. It's been years since I've seen a TRS gimble though. I'd glass it in and start over with a Bravo hole anyway so long as the transom is good. From the looks of it the Bravo might be as simple as making a new hole . That one looks small enough that the Bravo will work without any glassing. Just my 2cts.

Thanks for the response. I was wondering if the Bravo might work with out fill in. I will see about getting a hold of the Bravo template to check. I was told the transom was solid.

Mike

Mike,
Is this the 28 Webbcraft in Oklahoma City? Did you buy it? Just curious. BTW welcome to OSO!
Bob

Fast Shafts,

It is the Equalizer in OKC. I am very interested in the boat, but I am trying to do the homework so I know what I am getting into. The gent with the boat says it is cut for TRS drive but, the markings left from the gimbal housing dont look like a TRS gimbal?

My thought was to purchase and take my time to finish the cuddy out and utilize as a lake boat.

Mike

Steve, I also expressed interest in this boat-if you do a search for "Webbcraft", you'll find this is a Webbcraft Equalizer-possibly the old race boat "Duces R Wild". It originally had a Speedmaster III (TRS) . The guy selling it also refers to the bow balast tank as a "fuel recovery system", he obviously does not know much about this boat. Hope this info helps.
Bob