Offshoreonly.com - lower shift cable & water hose help

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - lower shift cable & water hose help (https://www.offshoreonly.com/forums/drives-lower-units/252023-lower-shift-cable-water-hose-help.html)

maico

04-24-2011 07:08 PM

thanks every one.Hi pitts can you tell me where you got the tool and hose. I'll get the incerts and try to come up with a home made tool.

Raizorsedge

04-24-2011 07:25 PM

Quote:

Originally Posted by mrfixxall (Post 3385415)

all the shift cable adjustment tool is is a piece of 1/4'' x1''x6'' flat stock with a slit cut into it..its a joke what they get for it..

Sorry for the hi-jack
Is it truly 1/4 inch thick? I would really like to make one up. I was going to order one but I have a bunch of flat stock laying around.
Thanks

pitts1313

04-24-2011 08:47 PM

Quote:

Originally Posted by maico (Post 3385554)

thanks every one.Hi pitts can you tell me where you got the tool and hose. I'll get the incerts and try to come up with a home made tool.

91-43579 is the mercury part number for the hose insert tool. You can get the tool on eBay, iboats, sterndrive sites. I get a lot of my OEM parts, such as the hoses and inserts, from BAM Marine or my local mercury dealer.

maico

04-28-2011 08:56 PM

OK, got the shift cable drilled out and enlarged for the new cable and I'm ready to reinstall gimble housing and outdrive. is there a certain order that should be fallowed.
thanks
Dave

All times are GMT -5. The time now is 03:43 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page