We have done business with them for the past few years and have had very good luck. They have also stood behind their products with any issues we have had.
97FASTech
01-23-2012 05:03 PM
Bought a reman 1X from them in September. Great shop and people. Scott loves helping any military guys. I would recommend them in a heart beat.
JetJock
01-24-2012 06:57 AM
thank you all for the input.....also there is "Clear Lake Power Boat" over at Clear Lake Marina. I do not know much about them.....anyone?
Biggus
01-24-2012 07:19 AM
Originally Posted by JetJock
(Post 3600320)
thank you all for the input.....also there is "Clear Lake Power Boat" over at Clear Lake Marina. I do not know much about them.....anyone?
Yes, Clear Lake Power Boat Service (CLPBS) Ed Shy, good guy, Know's his trade well, very solid reputation.
Kurt
Boatman1643
10-22-2013 07:01 AM
Yes Unfortunately
Originally Posted by mroberts
(Post 3389410)
Anyone dealt of or know of Victory marine in Dickinson, TX
I took my Donzi with 525s for Preventive Maintenance at Victory Marine. Interestingly I found out They do not know what a “Used Valve” looks like & put a Used Set of Heads on one engine. This led to a complete tear down at Nickens Brothers where a Crack in one of the Victory heads was discovered along with a bad cam shaft. Victory did pay for the rework of the heads, but to add insult to injury, I was charged full list price plus for the cam shaft. What Really concerns me is the engines had 350 hours on them & with the installation of the bad heads by Victory, it probably would have been a catastrophic engine failure (of which would not have been their fault of course). The other issue I had was Victory rebuilt an XR drive & it lasted about ten (10) hours – Lost a complete upper & again was Not Their Problem. Nice folks - Just be very careful with the work they claim to do.
