new drive from IMCO
10-07-2011 | 01:48 PM
#101
Registered
Joined: Mar 2008
Posts: 3,613
Likes: 375
From: Traverse City MI
I called IMCO. Their tech/sales guy says that the new - 4 surface drive has the same internal gears on both the upper and lower as the SCX, but both the upper and lower cases are different to allow for the -4. The drive is not yet available but should be out by Dec or Jan. They plan to retail the drive for $16,650 per drive which will include a new Helmet and reservoir in that price.
And it will look like the drive in this previously posted pic.
And it will look like the drive in this previously posted pic.
10-07-2011 | 01:50 PM
#102
Registered
Joined: Mar 2008
Posts: 3,613
Likes: 375
From: Traverse City MI
Arneson cheerleading or any bravo bolt on surface drive excited me!
10-08-2011 | 10:44 AM
#104
Registered
Joined: May 2001
Posts: 1,384
Likes: 2
From: West Michigan
What is the height range for the lower bullet above/below the hull in inches to be considered a surfacing application using a standard transom assembly (no extension boxes)? These things could be the simple (albeit expensive) answer to a lot of guys prayers.
10-09-2011 | 09:35 AM
#105
Registered
Joined: May 2007
Posts: 316
Likes: 0
From: GH MI
Yes, it's going to be killer. Higher X dimensions, larger dia. #6 props. Less drive in the water, more prop in. Faster boats, less broken props. I want two. Just gotta cough up 30k +.
Last edited by Dan Adams; 10-09-2011 at 09:37 AM. Reason: more verbage
10-11-2011 | 04:43 PM
#107
Registered
Joined: Jul 2003
Posts: 323
Likes: 0
From: Cumming GA
10-11-2011 | 05:34 PM
#108
Registered
Joined: Mar 2008
Posts: 3,613
Likes: 375
From: Traverse City MI
WOW! FACEBOOK has all the good info! Funny chit. Thanks for posting.
Dan...yes you need a pair of them! Looking forward to a ride in your fountain once installed! Not sure if it can top the ride you gave Kristy and I in the saber at the TC Bay blast poker run though!
Dan...yes you need a pair of them! Looking forward to a ride in your fountain once installed! Not sure if it can top the ride you gave Kristy and I in the saber at the TC Bay blast poker run though!
10-11-2011 | 07:13 PM
#110
Registered
Joined: Jun 2006
Posts: 764
Likes: 6
From: ILL
Man now I think I will wait and look at this drive big time. How much for a #6 prop? And just wounder so getting on plane will be better with number 6. My set up now is a imco 1.35gear lower -2 and a bravo one 35". Just to ask....... What would get up better my setup now or this new drive with a number 6?
Thank u
Thank u
