Offshoreonly.com
Page 3 of 6
1
2
3
4
5
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   Imco SCX Set Up (https://www.offshoreonly.com/forums/drives-lower-units/254285-imco-scx-set-up.html)

offshoredrillin 06-15-2011 06:07 AM
Originally Posted by 2112 (Post 3429400)
I was wondering the same about the ITS gimbal. :confused:
yes it will bolt up :)

2112 06-15-2011 09:26 AM
Originally Posted by offshoredrillin (Post 3429526)
yes it will bolt up :)
No plans from IMCO to build an upgraded ITS gimbal ring?

offshoredrillin 06-15-2011 05:55 PM
Originally Posted by 2112 (Post 3429666)
No plans from IMCO to build an upgraded ITS gimbal ring?
I'm sure they will in time, I have to admit I'm pretty impresed with the way imco has approached things over the past couple years. it used to be they wouldn't warranty anything and results were scant, but they have really stepped up and engineered and are standing behind them.

SkiDoc 06-16-2011 04:53 AM
Problem with shifting was a long shift cable and not the drive itself. I also forgot to mention that after running the temperature of the drive was very cold. Their internal cooling system works great.

bobsbillets 06-16-2011 10:35 PM
Did your boat slow down like everyone else's seems to switching over from a B1 drive?

SkiDoc 06-17-2011 05:12 AM
No, but I'm set up just over 2 inches above the bottom in shaft depth. My bravo set up was 3.5 inches lower. Actually is more
efficient now.

offshoredrillin 06-17-2011 08:58 AM
Originally Posted by bobsbillets (Post 3431282)
Did your boat slow down like everyone else's seems to switching over from a B1 drive?
i know of two boats here that have done the scx upper and sc lower and the speeds have remained the same.

NWPC 06-17-2011 10:36 AM
Make that three. No change.

racinfever 06-18-2011 12:12 PM
4 & no change in speed

waconda 06-18-2011 10:12 PM
Originally Posted by SkiDoc (Post 3430416)
Problem with shifting was a long shift cable and not the drive itself. I also forgot to mention that after running the temperature of the drive was very cold. Their internal cooling system works great.
What temps did you see?


All times are GMT -5. The time now is 09:18 PM.
Page 3 of 6
1
2
3
4
5
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.