Offshoreonly.com - Trim settings not holding

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Trim settings not holding (https://www.offshoreonly.com/forums/drives-lower-units/257062-trim-settings-not-holding.html)

tbanzer

07-01-2011 05:17 PM

Trim settings not holding

When I set the trim to a certain point I must keep adjusting the trim up to maintain the desired setting. I rebuilt both trim cylinders with no change . If I leave the drive up when Im done using the boat the following morning the drive will drop down completely. Are there check valves in the trim pump that can be cleaned or replaced?

picklenjim

07-01-2011 08:52 PM

What drive and pump might we be talking about?

tbanzer

07-02-2011 12:04 AM

Quote:

Originally Posted by picklenjim (Post 3443421)

What drive and pump might we be talking about?

That would probably help, Bravo drive, not sure what pump, its the original from when the boat was built in 2000.

All times are GMT -5. The time now is 12:57 AM.