Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   Bravo 1 to Imco shorty conversion (https://www.offshoreonly.com/forums/drives-lower-units/260417-bravo-1-imco-shorty-conversion.html)

snapmorgan 08-16-2011 10:43 PM

Bravo 1 to Imco shorty conversion
 
Will standard Bravo 1 parts work in an Imco lower housing or do they have to be XR parts?

Thanks

snapmorgan 08-17-2011 05:26 PM

anyone?

Drock78 08-17-2011 05:49 PM

from what im told you can use standard bravo parts

catman01 08-17-2011 09:42 PM

You can use most of your internals but you will need a vert shaft, cav plate and some new bearings. If you have questions or need the parts to do the conversion give me a call I can help you out. 989-464-5531 Rob

snapmorgan 08-17-2011 10:42 PM

will do. Thanks

Drock78 08-18-2011 12:33 PM

i have an Imco cavitation plate for sale if you need one

snapmorgan 08-18-2011 10:13 PM

I have one that I think will work. It came with the XR upper i purchased. Thanks

ROTAX454 08-19-2011 10:15 AM

To insure the best performance/reliability in your new lower, give Aaron a call at Max Machine Worx. They are sending me the parts to do precisely what you are doing.
If you are trying to fill your IMCO lower with the least expensive parts, don't call.

snapmorgan 08-22-2011 05:56 PM

Just happen to have an extra bravo lower laying around and was wanting to try out a shorty to see if it would pick my boat up any before I spent ANOTHER couple grand.

AIR TIME 08-22-2011 06:52 PM

I did just that, bought a 2'' shortie it came with shaft and cav plate. paid 500 plus bearings to swap it over. it was a 2'' shortie run behind my ol24 650hp. a friend has 900 plus hp in a 31 sutphen single with a xr with max worx guts and a shortie. its holding up.

snapmorgan 08-23-2011 09:30 AM

I have a new XR upper and an extra B1 lower. Just running 600hp. Now I need to find a short lower case.

articfriends 08-23-2011 06:31 PM


Originally Posted by snapmorgan (Post 3486349)
I have a new XR upper and an extra B1 lower. Just running 600hp. Now I need to find a short lower case.

If it works out for you and you want to sell the empty spare std bravo lower down the road let me know, Smitty

snapmorgan 08-23-2011 10:29 PM

Will do. Thanks

ericwinters 12-06-2014 08:34 PM

Yes they will, what you're looking to do is a Bravo I to Bravo IV conversion with cryogenic parts and replace the Mercury lower unit with an IMCO SC Extreme lower unit, this way if you have a ITS or XV box the Mercury Racing Helmet will still work with it, but the IMCO lower unit is more aerodynamic and causing less prop slipage. This conversion will hold 1000 HP without any problem, I have one, an XV Box with a Bravo IV-S4C Upper Unit and an IMCO SC Extreme 1.35 Lower Unit, with a 34" Maximus Prop. it runs perfect with a Blown 525 EFI turning about 950HP.


All times are GMT -5. The time now is 10:31 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.