Notices

imco scx

Old 08-22-2011 | 08:25 PM
  #1  
weldcrane's Avatar
Thread Starter
VIP Member
 
Joined: Sep 2010
Posts: 555
Likes: 0
Default imco scx

is any running these drives ?
weldcrane is offline  
Reply
Old 08-23-2011 | 04:57 AM
  #2  
Mr Gadgets's Avatar
Charter Member #601
 
Joined: Dec 2000
Posts: 3,276
Likes: 5
From: Holland, Mi USA.
Default

Yes, they are. Friend of mine has 36' Apache, wore out his first set of gears at 500+hrs. He runs it very hard. 825hp, vortec blowers.. Hope that helps.
Dick
Mr Gadgets is offline  
Reply
Old 08-23-2011 | 06:02 AM
  #3  
weldcrane's Avatar
Thread Starter
VIP Member
 
Joined: Sep 2010
Posts: 555
Likes: 0
Default

thats what i want to hear going to put a set on the back of my cat
weldcrane is offline  
Reply
Old 08-23-2011 | 07:47 AM
  #4  
Quinlan's Avatar
VIP Member
20 Year Member
VIP Member
 
Joined: Jul 2003
Posts: 4,282
Likes: 773
From: Tulsa, GLOC
Default

Well Mr Gadgets can hook you up
Quinlan is offline  
Reply
Old 08-23-2011 | 09:58 AM
  #5  
Registered
 
Joined: Jan 2010
Posts: 297
Likes: 0
From: North Bend Ohio
Default

Originally Posted by weldcrane
is any running these drives ?
I have two on my 34' with 950 HP each. No problems yet and i don't baby it
Advantage 575 is offline  
Reply
Old 08-23-2011 | 10:51 AM
  #6  
Registered
 
Joined: Sep 2003
Posts: 521
Likes: 1
From: Fort Erie Ontario Canada
Default

just put them on my 38 with sc lowers, so far so good.
JMPH is offline  
Reply
Old 08-23-2011 | 06:38 PM
  #7  
Registered
20 Year Member
 
Joined: Oct 2002
Posts: 2,055
Likes: 91
From: Bowling Green, Kentucky
Default

So far so good after adjusted linkage. Shifts very well. Weld need to get the prop height so the bullet is above the bottom.
SkiDoc is offline  
Reply
Old 08-23-2011 | 09:34 PM
  #8  
weldcrane's Avatar
Thread Starter
VIP Member
 
Joined: Sep 2010
Posts: 555
Likes: 0
Default

ordered a pair today already have sc lowers wish me luck
weldcrane is offline  
Reply
Old 08-28-2011 | 04:53 PM
  #9  
Registered
15 Year Member
 
Joined: Jul 2007
Posts: 2,640
Likes: 14
From: MI
Default

Originally Posted by weldcrane
ordered a pair today already have sc lowers wish me luck
Keep us posted on your results. I have a bmax ready to install but i am not above 700hp level...not to say i couldnt grenade it with that... Anyway, Going to finish this year out with the xr and swap into the bmax when i go 540 this winter.
JRider is offline  
Reply
Old 08-28-2011 | 05:36 PM
  #10  
Eliminator05's Avatar
Platinum Member
 
Joined: Jan 2005
Posts: 46
Likes: 0
From: Valparaiso, Indiana
Default

Have two on my 33 Elimiator Daytona 1100 hp motors
Eliminator05 is offline  
Reply

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.