Offshoreonly.com - brovo carrier bearing help

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - brovo carrier bearing help (https://www.offshoreonly.com/forums/drives-lower-units/265894-brovo-carrier-bearing-help.html)

big jing 2

11-18-2011 03:04 PM

brovo carrier bearing help

Replacing carrier bearings in 91 brovos, old ones were shimed-new ones came with chrush washer...Am I right to figure the new ones MUST be shimed also as the manual says? Or can the chrush sleeve be used on 91 brovos...No one has the shim package in stock....Help Ken

Clustergear

11-18-2011 07:40 PM

You can use a crush collar. But use the thrush washer for a crush collar, not the one your drive has in it now.

Mr Gadgets

11-19-2011 12:05 AM

When using the crush sleeve, the washer should measure .105" thick. And as Cluster said, it will be fine using the crush sleeve.

Clustergear

11-19-2011 07:17 PM

Heres the part # 12-42256

fireboatpilot

11-19-2011 07:39 PM

What's a Brovo? (Sorry, had to do it.)

All times are GMT -5. The time now is 12:07 PM.