Notices

Upgrade drives

Old 01-01-2012 | 01:56 AM
  #1  
Thread Starter
Registered
 
Joined: Aug 2010
Posts: 4
Likes: 0
Default Upgrade drives

I am new to the fountain family.just purchased an 89 36ft Fever, had the twin 454's completely rebuilt, full roller, with b&m 250 blowers.
The boat has trs drives and am thinking about upgrading. Which way do I go?
jpep is offline  
Reply
Old 01-01-2012 | 02:32 AM
  #2  
tcelano's Avatar
Registered
20 Year Member
 
Joined: Oct 2004
Posts: 616
Likes: 1
From: Portland, OR
Default

Easiest way out of TRS setup is probably A Konrad conversion.

Almost anything else involves redoing the transom and/or moving the motors.
tcelano is offline  
Reply
Old 01-01-2012 | 12:57 PM
  #3  
Registered
 
Joined: Aug 2001
Posts: 214
Likes: 0
From: lake of the ozarks,missouri
Default konrads

i just installed the half conversion back in september and love them on my 1990 42 ft.500hp with bm 250 blowers.i got tired of breaking the trs units[4 total]i sell them ,wes573-374-4641lake of the ozarks
proboat-wes is offline  
Reply
Old 01-01-2012 | 01:37 PM
  #4  
Registered
 
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
Default

If you don't mind a little work To install I can give you a great deal on my ssm3s with gimbles
Unlimited jd is offline  
Reply
Old 01-01-2012 | 02:08 PM
  #5  
cigboat1's Avatar
Registered
 
Joined: Aug 2007
Posts: 505
Likes: 5
From: Vermilion,Ohio
Default

Don't do anything until you break them..... If you do decide to go to something newer or bigger and take the TRS drives off you can sell them for hard cash !Its becoming hard to find replacement parts --good luck ...
Jim


If your boat goes faster than 75 mph you might try nose cones as a cheap suggestion !!

Last edited by cigboat1; 01-01-2012 at 02:22 PM.
cigboat1 is offline  
Reply
Old 01-01-2012 | 02:31 PM
  #6  
Registered
 
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
Default

I've got 3 spare trs' apparently not too hard to come by in the northeast!! Lol
Unlimited jd is offline  
Reply
Old 01-06-2012 | 10:35 AM
  #7  
Registered
 
Joined: Apr 2007
Posts: 223
Likes: 0
Default

Go with Konrads. You'll have far less problems and all parts are readly available. You'll be much happier. Can use your existing Gimbals. We can help you out with getting them/ We are a Dealer. Give us a call. 954 237 0332
John the Drive Man is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.