Offshoreonly.com - New clutch

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - New clutch (https://www.offshoreonly.com/forums/drives-lower-units/271074-new-clutch.html)

blue thunder

02-23-2012 09:49 AM

Quote:

Originally Posted by TWIN-SPINS (Post 3622388)

my spare xr drive has a worn clutch,,, what is the best way to repair it,,install new forward and reverse gears,,,or can i just install a new clutch,,,iam thinking new gears also,,,whats do you guys say???

What leads you to believe your clutch is worn?

dereknkathy

02-27-2012 05:14 AM

Quote:

Originally Posted by waconda (Post 3624827)

Is that KY lapping paste or crest? I just what the correct stuff.

don't confuse lapping compound with KY jelly. the spousal unit will NOT be happy.

Mr Gadgets

02-27-2012 05:49 AM

Quote:

Originally Posted by dereknkathy (Post 3627907)

don't confuse lapping compound with KY jelly. the spousal unit will NOT be happy.

Oh No!! Hopefully you dont speak from experience on this one!! :)
Another bit of advice to not try at home!!!
(Sorry, couldnt resist)

Seriouly.. what does make you think you need a new cone Twin Spin??? Is it slipping when it engages?? Or what.

peterunwin

02-28-2012 10:04 AM

2 Attachment(s)

Quote:

Originally Posted by waconda (Post 3624827)

Is that KY lapping paste or crest? I just what the correct stuff.

Hi,
I use 320 grit silicon carbide oil based below are a couple of examples of before and after lapping on a hydraulic motor valve plate.

Peter

All times are GMT -5. The time now is 11:08 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page