Go Back  Offshoreonly.com > Technical > Drives and Lower Units
bravo 1 fluid coming out bottle >

bravo 1 fluid coming out bottle

Notices

bravo 1 fluid coming out bottle

Thread Tools
 
Old 06-18-2012 | 09:45 AM
  #1  
Thread Starter
Registered
15 Year Member
 
Joined: Apr 2008
Posts: 577
Likes: 11
From: sandown, nh
Default bravo 1 fluid coming out bottle

is it normal for a little fluid to come out the overflow. ( bottle was about half full). or am i going to have further problems in the future.
prostockcat is offline  
Reply
Old 06-18-2012 | 03:08 PM
  #2  
Registered
 
Joined: Jan 2009
Posts: 308
Likes: 0
From: Riverside, CA
Default

Has the boat been sitting and then you filled up the bottle? I notice that if my boat sits for the winter and I check the level in the bottle it is a bit low. Run the boat for a bit and it comes back to full or normal. Just a thought....
bobsbillets is offline  
Reply
Old 06-18-2012 | 04:04 PM
  #3  
Registered
10 Year Member
 
Joined: Jun 2011
Posts: 1,209
Likes: 141
Default

Check the little one way rubber valve under the cap. It allows air in but keeps fluid from getting pushed out at the drive runs and heats up the oil. Mine was pushing fluid out the cap at high rpm but I had the little rubber piece missing. Spent $9 on a new cap and it solved the problem.
Trash is offline  
Reply
Old 06-19-2012 | 07:49 PM
  #4  
Thread Starter
Registered
15 Year Member
 
Joined: Apr 2008
Posts: 577
Likes: 11
From: sandown, nh
Default

thank for the help ill check that cap
prostockcat is offline  
Reply
Old 06-20-2012 | 10:02 AM
  #5  
mcollinstn's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Sep 2001
Posts: 5,769
Likes: 150
From: tn
Default

There's air trapped in the drive.
Leave it stored (trailer, marina, etc) with the drive trimmed all the way IN for a couple of days and maybe the air bubble will travel up and out.

If you can't get it to act right, then you might need to drain the lube from the bottom and refill from the bottom with a pump - drive trimmed in. That's the proper position to purge the air.

MC
mcollinstn is offline  
Reply
Old 07-08-2012 | 09:32 PM
  #6  
Registered
 
Joined: Apr 2011
Posts: 16
Likes: 0
From: Chino, CA
Default Gear oil overflow

I am having the same problem, My cap is good, I changed the oil, filled from bottom up, and it still pushes all the oil out of the reservoir. I'm stumped!
oldnordic guy is offline  
Reply
Old 07-08-2012 | 09:43 PM
  #7  
Registered
 
Joined: May 2010
Posts: 638
Likes: 0
Default

Originally Posted by oldnordic guy
I am having the same problem, My cap is good, I changed the oil, filled from bottom up, and it still pushes all the oil out of the reservoir. I'm stumped!
Can be the yoke seal. It's mixing water in the oil filing the bottle. Only way to check is to pull drive and look at seal.
GTOFFSHORE is offline  
Reply
Old 07-08-2012 | 09:47 PM
  #8  
Registered
 
Joined: Apr 2011
Posts: 16
Likes: 0
From: Chino, CA
Default seal

Outdrive is off, seal is good (gonna replace it anyway) no water in oil..... I did notice that when i run it, there are little air bottles that come up sometimes, all the oil will get pushed out of reservoir.
oldnordic guy is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.