imco sc question
 

putting new imco gimble rings and bells on my boat and when i removed drives{ imco sc s} i noticed the u joints bad .i called imco and they say they are $228.00 each also the same as xr drives i told them i had 2 diff cap sizes 1.328 and 1 .217 . they claim they are all the same size .so is the guy i talked to wrong ??.he also said i could buy them from mercruiser for an xr if so whats the part # im looking for. i know the early xrs had real big joints and those are no longer avail .looking to get this back together for a run in conn. thanks

I have two different sizes also.
Steve

The 1.328, should have grease fittings and are the old XR ujoints, Merc PN 862132T. Bam shows them still available for $170.31
The 1.217, should not have grease fittings and are the new XR ujoints, Merc PN 866136A01. Bam shows them for $203.17.

This is what I found when researching the it.. If you go to Bam's site and look at the drawing look up.. those are the pn's they show.
Hope that helps.
Dick

im looking for the part # of the joint with 2 diff size caps one side is 1.328 the other side is 1.217 thanks

That is a new one on me. I have not seen that joint before.

Dick

Conversion joint, never seen them on a drive but in pieced together trucks plenty of times

Here is a link for the 1.328 ujoint http://www.bravoshop.net/index.php?m...2132&x=10&y=10

Anyone figure this out