Notices

imco sc question

Thread Tools
 
Old 10-02-2012, 08:01 PM
  #1  
Registered
Thread Starter
iTrader: (30)
 
Join Date: Dec 2004
Location: hampstead nh
Posts: 3,194
Likes: 0
Received 5 Likes on 5 Posts
Default imco sc question

putting new imco gimble rings and bells on my boat and when i removed drives{ imco sc s} i noticed the u joints bad .i called imco and they say they are $228.00 each also the same as xr drives i told them i had 2 diff cap sizes 1.328 and 1 .217 . they claim they are all the same size .so is the guy i talked to wrong ??.he also said i could buy them from mercruiser for an xr if so whats the part # im looking for. i know the early xrs had real big joints and those are no longer avail .looking to get this back together for a run in conn. thanks
smokin' gun is offline  
Old 10-02-2012, 08:16 PM
  #2  
Registered
iTrader: (1)
 
Join Date: Sep 2008
Posts: 1,016
Likes: 0
Received 2 Likes on 2 Posts
Default

I have two different sizes also.
Steve
smiklos@sunprint is offline  
Old 10-02-2012, 08:36 PM
  #3  
Charter Member #601
Charter Member
 
Mr Gadgets's Avatar
 
Join Date: Dec 2000
Location: Holland, Mi USA.
Posts: 3,276
Received 5 Likes on 4 Posts
Default

The 1.328, should have grease fittings and are the old XR ujoints, Merc PN 862132T. Bam shows them still available for $170.31
The 1.217, should not have grease fittings and are the new XR ujoints, Merc PN 866136A01. Bam shows them for $203.17.

This is what I found when researching the it.. If you go to Bam's site and look at the drawing look up.. those are the pn's they show.
Hope that helps.
Dick
Mr Gadgets is offline  
Old 10-03-2012, 04:49 AM
  #4  
Registered
Thread Starter
iTrader: (30)
 
Join Date: Dec 2004
Location: hampstead nh
Posts: 3,194
Likes: 0
Received 5 Likes on 5 Posts
Default

Originally Posted by Mr Gadgets
The 1.328, should have grease fittings and are the old XR ujoints, Merc PN 862132T. Bam shows them still available for $170.31
The 1.217, should not have grease fittings and are the new XR ujoints, Merc PN 866136A01. Bam shows them for $203.17.

This is what I found when researching the it.. If you go to Bam's site and look at the drawing look up.. those are the pn's they show.
Hope that helps.
Dick
im looking for the part # of the joint with 2 diff size caps one side is 1.328 the other side is 1.217 thanks
smokin' gun is offline  
Old 10-03-2012, 05:52 AM
  #5  
Charter Member #601
Charter Member
 
Mr Gadgets's Avatar
 
Join Date: Dec 2000
Location: Holland, Mi USA.
Posts: 3,276
Received 5 Likes on 4 Posts
Default

That is a new one on me. I have not seen that joint before.

Dick
Mr Gadgets is offline  
Old 10-03-2012, 06:06 AM
  #6  
Registered
iTrader: (5)
 
Join Date: Jul 2009
Location: Taunton Ma
Posts: 8,527
Received 698 Likes on 341 Posts
Default

Conversion joint, never seen them on a drive but in pieced together trucks plenty of times
Unlimited jd is offline  
Old 10-03-2012, 07:05 AM
  #7  
Registered
 
Join Date: Oct 2007
Location: Union, NE
Posts: 468
Likes: 0
Received 0 Likes on 0 Posts
Default

Here is a link for the 1.328 ujoint http://www.bravoshop.net/index.php?m...2132&x=10&y=10
waconda is offline  
Old 02-14-2015, 02:22 PM
  #8  
mtm
Registered
iTrader: (4)
 
mtm's Avatar
 
Join Date: Apr 2002
Location: nj
Posts: 425
Received 0 Likes on 0 Posts
Default

Originally Posted by smokin' gun
im looking for the part # of the joint with 2 diff size caps one side is 1.328 the other side is 1.217 thanks
Anyone figure this out
mtm is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.