Alpha 1 transom plate
05-06-2014 | 04:38 PM
#1
Thread Starter
Registered
Joined: Sep 2008
Posts: 916
Likes: 41
From: Tampa Bay Area Florida/ North Miami Florida
Alpha 1 transom plate
Can anyone tell me if the inner transom plate on a Alpha 1 gen 2 is the same as a bravo inner transom plate. I have heard both ways.
Chris
Chris
05-06-2014 | 05:39 PM
#2
Registered
Joined: Feb 2012
Posts: 4,031
Likes: 10
From: westville, NJ
yes, i just hooked a 2000 bravo 3 inner to a 90 gen 1 alpha outer. the gen 2 alpha transom assy is essentially bravo castings. i have to plug 2 holes in the transom just above the alpha outer, because the gen 1 alpha housing is shorter. but everything on the inside lines up. used the bravo steering actuator, but the alpha fits in there the same way. but yours is probably later style anyway.
05-07-2014 | 08:32 PM
#4
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Yes. You can double check with Mercruiser parts.com. Same part numbers
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
