Ssm drive power limits
#11
Thread Starter
Registered

Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
They lasted 2 hours once in your possession. 
Just to be clear, these drives came off a boat that had about a dozen offshore races on them, prior to them needed rebuilds. Came off a 40ft vee with big sterling power that was ran hard.

Just to be clear, these drives came off a boat that had about a dozen offshore races on them, prior to them needed rebuilds. Came off a 40ft vee with big sterling power that was ran hard.
#12
Registered
Joined: Nov 2005
Posts: 2,399
Likes: 15
From: Toronto, Canada
32' fountain 900scs #3As 5 years with the sticks welded to the dash!! NOT ONE FAILURE!!! then refresh just because... then my cat 32' active same 900scs again driven like I stole it.. now same drives on my 43' Scarab with yet more power 1100scs.. 3 yrs running no failures... again they will be gone thru this year only because of routine maintenance... air time is what kills a drive quicker than anything else, secondly would be improper planing technique which is also brutal on the transmission... as for Mercury's rating.. the specs are conservative to say the least.. they were more interested in seeing the drive survive than testing its limitations... everyone I know who has speedy's has put them to "THE TEST" and never experienced problems
#13
Registered
Joined: Nov 2005
Posts: 2,399
Likes: 15
From: Toronto, Canada
I'm sure Eddy will tell you that boat was the TITZ!! when it had the blower motors in it
#14
Registered

Joined: Jun 2009
Posts: 9,969
Likes: 6,461
From: Chicago
I still don`t get why after the rebuilts and driving like a puss I see shavings on the magnets every time I check em/drain em. If I drove like AL they`d be back at Collabella . wtf.. both drives too and I`m not talking about the $hit that turns into mush when you rub it between your fingers I`m talking about slivers of metal.
I Fuc&$ en hate boats
I Fuc&$ en hate boats
Last edited by ICDEDPPL; 01-07-2015 at 07:09 PM.
#18
# 3 and 4 were rated to 700 racing HP #5 s were rated to 800 efi racing. If the drive was built right it will last ! we have pleasure boats running 1000 to1200 all day long with no problems
#19
Registered
Joined: Nov 2005
Posts: 2,399
Likes: 15
From: Toronto, Canada
I always wondered how much additional power does it take to run 3A's vs. Bravo's and Bmax's? For example, there's a nice looking 1993 42' fountain (except swim platform mod) with stock HP500's and V's got me thinking....what would that run with bravo's vs. these?
http://www.lakeozarksmarine.com/show...&submit=Search
http://www.lakeozarksmarine.com/show...&submit=Search
#20
Registered
Joined: Nov 2005
Posts: 2,399
Likes: 15
From: Toronto, Canada
and there you have it folks!! THE GURU has spoken!!! Dan Macnamara/ Team Archer!!!



