Installing mayfair add kit with the extra saginaw fitting kit, 6 in 1/4 hose missing
#1
Registered
Thread Starter
Join Date: Jul 2014
Location: Concord, NH
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Installing mayfair add kit with the extra saginaw fitting kit, 6 in 1/4 hose missing
Installing new mayfair dual ram add kit with the extra saginaw fitting kit, 6 in 1/4 slide on hose and clamps missing... Is this jut a low pressure rubber hose? Will standard hose clamps work?
The instructions and diagrams show the hose sliding over/connecting lines that need to be cut on the Saginaw shuttle valve.
Thanks, Jim
The instructions and diagrams show the hose sliding over/connecting lines that need to be cut on the Saginaw shuttle valve.
Thanks, Jim
#2
Registered
Thread Starter
Join Date: Jul 2014
Location: Concord, NH
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Just found out from the manufacturers that any 1/4 in id hose (fuel or other) a few inches long should work, clamps optional (I'll be clamping). Hasn't been an issue or included in kits for years, I guess I am running a dinosaur,,,,