Anyone know the torque setting for the four nuts on the drive bolts. Bravo 1 XR drives.

Thanks.

If you are talking about the 4 bolts on the top cap, they should be torque'd to 20 ft. lbs. Tightened in a criss cross pattern.

Are asking about the studs and nuts for reinstalling the lower to the upper ? If this is correct and If I recall correctly, its 35 ft lbs.

That's correct. Gear housing to drive shaft housing 35 ft. lbs

Thanks guys, wow only 35. Would have guessed higher.

35 it is, thanks.