Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   what drive should i buy (https://www.offshoreonly.com/forums/drives-lower-units/332185-what-drive-should-i-buy.html)

JEAGLE 11-04-2015 06:28 PM

what drive should i buy
 
looking at buying a new drive before engine build IMCO ,B MAX or? it's going to be on a 2001 Velocity 280 with a 500 and will be placing a pro charger on it .

David H 11-04-2015 08:23 PM

Welcome to my world. Except it will be 2X for me. I looked at the B-Max a week or so back. They are impressive looking. They are also local to me also. After the sale service means a lot........I just know that I am through with XR's.

HALLETT FAN 11-05-2015 11:38 AM

Almost a no - brainer , look at Imco , SCX and SCX-4 ! A company that's been around a while and has a lot of options and various
combinations to put together a drive for a lot of different boats .

pro27 11-05-2015 11:54 AM

1 Attachment(s)
Imco scx4[attach=config]547339[/attach] attached to a whippled 525 efi

offshorexcursion 11-05-2015 08:25 PM

IMCO SCX not the -4

Dave M 11-07-2015 12:31 PM

Following this thread......What are my options with ITS? I know with IMCO drives you need to replace the helmet, but what about the input shaft? Does IMCO make ITS ready drives? I was considering sending my drive to this place http://www.allamericandriveservice.c...rformance.html Any comments on that?

NevrThrottleBack 11-07-2015 04:08 PM

AADS, DPM "Mr. Gadgets", Max Machine Works, The Bravo shop all can upgrade a bravo drive but none of them can compare to a SCX especially for bang for the buck.

Bmax has a decent upper but the lower is just an upgraded XR

Obviously Arneson and X-Power make incredible products also!

Mr Gadgets 11-09-2015 03:49 PM

Dave,
you can get the SCX setup for ITS with the longer input shaft. There is also an ITS helmet that mounts a sensor, but it will not work with the Imco Gimbal ring, just the Merc ring.
Hope that helps.
Dick

IGetWet 11-09-2015 04:33 PM


Originally Posted by Mr Gadgets (Post 4374219)
Dave,
you can get the SCX setup for ITS with the longer input shaft. There is also an ITS helmet that mounts a sensor, but it will not work with the Imco Gimbal ring, just the Merc ring.
Hope that helps.
Dick

So in order to put a SCX or SCX4 on a Merc ITS you only need the Imco helmet along with the drive correct? Same as putting one on a standard Merc transom assembly?

joev01 11-10-2015 06:26 AM

I have a complete imco sct drive package from drive coupler to drive silver powder coated on the classified section all for $22,000.00

Quinlan 11-10-2015 07:19 AM


Originally Posted by IGetWet (Post 4374231)
So in order to put a SCX or SCX4 on a Merc ITS you only need the Imco helmet along with the drive correct? Same as putting one on a standard Merc transom assembly?

New drive res bottles too. And plan on being pretty much Bullet proof!

launchpad475 11-10-2015 06:12 PM

I put a Bmax on my 28 Nordic this year, nothing but good things to say about it. John's service and support after the fact is second to none. There are numerous reasons why I chose this route vs SCX, it's working great for me- I run the bmax upper and imco lower.

bad judgment 11-10-2015 09:33 PM

SCX!!! Hands down the best. Oh and I've got a pair with reservoirs and transoms for sale If your interested.

598 Formula 11-23-2015 04:00 PM


Originally Posted by bad judgment (Post 4374815)
SCX!!! Hands down the best. Oh and I've got a pair with reservoirs and transoms for sale If your interested.

Call me please transoms 252 three three three 5898. thanks

Im getting ready to put SCX's on my boat......6 XRs later!!!!


All times are GMT -5. The time now is 06:43 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.