Offshoreonly.com
Page 7 of 7
« First
5
6
7
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   Drive Showers (https://www.offshoreonly.com/forums/drives-lower-units/333500-drive-showers.html)

aquaforce 10-29-2016 09:49 PM
Originally Posted by Dkahnjob (Post 4495756)
Quick question for the brain trust. My new to me Formula 353 has XR drives and has never had drive shower on it. They came with the boat, just never installed. So before I drill the plates which side does the pickup go on? Since the props turn in opposite directions I would assume that the pickups are also on opposite sides. Question is on the Right hand rotation drive does the pickup go on the right or left. Assuming the left will be opposite.
Thanks,
Dave

The Simrek "Halo" is what I am running on my B1 triples which would be the same for your XR's. No drilling and delivers some of if not the best cooling performance according to test data. Good luck with yours and you should definitely have coolers on your drives.

AllDodge 10-31-2016 05:12 PM
This one looks like the Simrek model but the pic appears to be what I see as an Alpha model but its on a Bravo drive. This is a pic from a 2016 353 FasTech. Anyone know of this one? Simrek does not list it.

http://www.formulaboatsforum.com/VBF...tid=7071&stc=1


All times are GMT -5. The time now is 11:12 PM.
Page 7 of 7
« First
5
6
7
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.