TRS gear ratio
11-07-2016 | 06:50 PM
#1
Thread Starter
VIP Member
Joined: Mar 2009
Posts: 135
Likes: 1
From: Santa Fe, TX
TRS gear ratio
Is the TRS gear ratio from a 1977 Scarab with SBC 350's 1.50 or 1.33?
Thanks,
Shawn
Thanks,
Shawn
__________________
Browning Restorations - Wood and Vinyl Bulkhead Installation and Repair
Browning Restorations - Wood and Vinyl Bulkhead Installation and Repair
11-10-2016 | 07:19 PM
#4
Registered
Joined: Jan 2003
Posts: 6,018
Likes: 1,521
From: Grand Rapids, MI
11-11-2016 | 08:21 AM
#5
Registered
Joined: Feb 2007
Posts: 273
Likes: 4
From: erie pa
Back in the 80's I set up numerous TRS drives to a 1.32 ratio. Back then there wasn't big enough propellers for the engine hull combinations we had. Matter of fact today I am shipping out 1 of the tools to set up the lower TRS to a fellow OSO member to use. I will have to look at some old paper work to see how we did it.
11-12-2016 | 01:05 AM
#6
Registered
Joined: Mar 2009
Posts: 1,758
Likes: 3
From: OFallon,Mo.
Back in the 80's I set up numerous TRS drives to a 1.32 ratio. Back then there wasn't big enough propellers for the engine hull combinations we had. Matter of fact today I am shipping out 1 of the tools to set up the lower TRS to a fellow OSO member to use. I will have to look at some old paper work to see how we did it.
