same here.

MDC has a parts list from Mercury that will allow you to run a Drive Sync.

I wonder if the system can interface with the led indicators that have been out a couple years now.

Livorsi Marine, Inc. - LED Position Indicators

DriveSync is compatible with all aftermarket LED indicators including Livorsi and Mayfair as well as Mercury's SmartCraft. NMEA 0183 and 2000 outputs are also available to support glass panel displays.

GF?

Bump. For those that have this, are you still happy with the results and it's still working as advertised?

Thanks!

I installed a drive sync this summer, I bought the Race version with the 2 presets. super product I can just hit a toggle switch up for 1st preset, then same toggle down for second preset, or use the trim switch for normal operation.
It is super Bad A$$. I have no problem recommending this product. also the customer service from Mike is Fantastic!

Yep - product is awesome and Mike Clesceri is great to work with, as well. He cares about the product and his customers satisfaction. I too would not hesitate to recommend - my opinion is no 90+ mph boat should be sold without it.

^^^ Thanks all.... Ordered :drink:

On different note, anyone have any experience with the IAC Survival Kit. Is it a necessary item?

if you have 600 or 700s make sure you do the circuit protection from Merc, there was a service bulletin about it. Have your engines looked up in the database to verify, BUP on here stocks the kits and can look up your engine history for this bulletin and others.

I made my own fuse jumper harnesses. Details are in a post a few years ago. 1 amp fuse.