SSM Extension Boxes
09-17-2017 | 07:24 AM
#1
Thread Starter
Registered
Joined: May 2009
Posts: 3,895
Likes: 124
From: Chicago, IL; Onekama, MI
SSM Extension Boxes
I have the new drives and boxes for my Scarab, and my question is for the boxes. The merc diagram shows a flat plate to be used inside of the transom but I do not have that plate. I do have the SSM inner plate, can this be used? Is there any reason why you would need to use the larger box plate?
If it matters, I'm running #V drives with 1000 hp.
If it matters, I'm running #V drives with 1000 hp.
09-26-2017 | 05:06 PM
#2
Registered
Joined: Feb 2014
Posts: 25
Likes: 3
From: Ft. Myers, FL
The Mercury box came with a flat plate. I has a much smaller transom cutout, just for driveline, no steering arm. You will need a remote drive reservoir. I like the Latham steering reservoir for this. I may still have a new plate & the special gasket. Don
09-26-2017 | 09:58 PM
#3
Thread Starter
Registered
Joined: May 2009
Posts: 3,895
Likes: 124
From: Chicago, IL; Onekama, MI
If you have the plate, and gasket, PM me what you want for them.
