0LikesKiekhaefer J1171 trim pump pressure
02-20-2018, 10:52 AM
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Deland, Fl
My Boat: Bertram 38' Comp'
Posts: 661
Kiekhaefer J1171 trim pump pressure
I test two pumps. 1 has 3400psi up and 2000 down.
2nd has 2000psi up and 800psi down. Can i adjust pressure or pump is it worn out.
Thanks for your input
B38
2nd has 2000psi up and 800psi down. Can i adjust pressure or pump is it worn out.
Thanks for your input
B38
02-20-2018, 11:36 AM
#2
Registered
Join Date: May 2010
Location: Red Oak, Texas
My Boat: 30' Scarab
Posts: 722
Don't take this for gospel, but I know Merc made a high pressure/low volume pump and a high volume/ low pressure pump. The J1171 is the marine certification number, not the part number, so I'll leave it to someone else to decipher the way to tell the difference. You might have one of each. I used the high pressure on the K-planes and the high volume (faster response) on the drives.
02-20-2018, 06:39 PM
#3
Registered
Thread Starter
Join Date: Oct 2000
Location: Deland, Fl
My Boat: Bertram 38' Comp'
Posts: 661
They do look differant. Now you got me looking around for #s.
«
Previous Thread
|
Next Thread
»
Linear Mode
