Imco SC Rebuild
#1
RIPSTA Racing Team
VIP Member
Thread Starter
Imco SC Rebuild
So on a scale of 1 to 10, how hard is it to rebuild(replace gears, seals)an Imco SC upper and lower? I have a pair that will be needing gears in both uppers and I am changing gears in the lowers to a different ratio. Looking to save some money but also educate myself.
#3
Registered
iTrader: (4)
You will need to buy the manuals, tools, and I would highly suggest a drive work stand. All in, you are probably looking at $1600 for all the tools and stand. So long as you can follow directions and are patient, you can build your own drives.
#4
Registered
Join Date: Jul 2012
Location: Stony Point NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I recently upgraded my upper bravo 1 to XR with a 1:35, I was going to reuse the lower 1:65 until I eventually upgrade to an imco with same gear.But for now would the final gear ratio be ?
#5
VIP Member
VIP Member
#6
Charter Member # 55
Charter Member
It may still come out as 1.5 as JT said(I don't know and he knows a ton more than me about XR's) but there is really no such thing as a 1.35 upper XR.