What's the story on this, Blackhawk surface drive?
#11
Registered
#12
Offshoreonly Advertiser
Offshoreonly Advertiser
Do you know what version you have? If possible post a picture of your existing stuff.
I do have some props but I don't think I want to shake any loose at this point.
I do have some props but I don't think I want to shake any loose at this point.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#13
Registered
#14
Registered
Gold Member
Friend of mine has one on a Concord Mach II with a 350 MAG MPI and it’s an absolute blast to drive. If I remember right his seems to like more of a neutral trim setting vs flying the nose a little higher with a traditional drive. Boat runs about 72 or so with it on there
#16
Offshoreonly Advertiser
Offshoreonly Advertiser
I hate to tell you this but I need to see the inside of the case with the upper gear set out. There are at least 2 versions. One has a shaft setup just like a Bravo. I'll post some pics later.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#17
Registered
Last edited by 12meter joe; 10-15-2020 at 08:03 AM.
#18
Registered
Join Date: Jul 2022
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Yes if that was an original Blackhawk boat the hull is set up for it. And it really likes it Probably worth almost 10 mph over a standard Bravo boat.
As far as parts hard to find a good number of the components are the same as a Bravo 3. And drives come up on Ebay all the time.
I happen to have 8 brand new housings and enough new parts to put together 4 complete drives.
As far as parts hard to find a good number of the components are the same as a Bravo 3. And drives come up on Ebay all the time.
I happen to have 8 brand new housings and enough new parts to put together 4 complete drives.
#19
Offshoreonly Advertiser
Offshoreonly Advertiser
Sure, what are you looking for?
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#20
VIP Member
VIP Member