|
I have a couple of friends that have had to have AADS warranty multiple drives over the past couple years. Great that they warranty them but cant replace downtime and shipping back and forth.
|
Stock XRs should live behind twin stock 500 EFIs.
|
Originally Posted by thirdchildhood
(Post 4752097)
Stock XRs should live behind twin stock 500 EFIs.
I saw less metal on stock 300 hour magnets than I do these at 40 hours. To me it looks like something failed in the drive. Or has impending failure. Especially with the oil looking the way it does. Goerge thinks it’s from improper shift adjustment. I’m skeptical...but let’s see what they find. He’s been a stand up dude and knows his stuff. I’ll give him the benefit of the doubt until proven otherwise. will report back. |
Stock XR's should live behind 525's but the gears suck. George does know his stuff but are the others who work for him doing the assembly and setup on the same leve as George? Curious to see what happened.
|
50 hours on the oil? Was it changed after initial break in?
|
Originally Posted by 1MOSES1
(Post 4752108)
Agreed. These are upgraded drives too.
I saw less metal on stock 300 hour magnets than I do these at 40 hours. To me it looks like something failed in the drive. Or has impending failure. Especially with the oil looking the way it does. Goerge thinks it’s from improper shift adjustment. I’m skeptical...but let’s see what they find. He’s been a stand up dude and knows his stuff. I’ll give him the benefit of the doubt until proven otherwise. will report back. With that much material on the magnet, it looks like a gear failure to me, I’ve seen this several times. |
Originally Posted by Unlimited jd
(Post 4752132)
50 hours on the oil? Was it changed after initial break in?
replaced with neo oil 30 ish hours on this neo oil. AADS recommends this oil can go all year without a change. Claims 40-60 hours. the other drive oil looks brand new. |
Originally Posted by JaayTeee
(Post 4752148)
They can fail behind 500EFI’s. we had a 2 hour ride back in 100* temps @ the GLOC poker run several years ago when my buddy’s boat had a gear tooth shear and pushed the pinion set out the front of the case.
With that much material on the magnet, it looks like a gear failure to me, I’ve seen this several times. given these are completely refreshed xr’s, with low hours...I wouldn’t expect a failure so quickly. agreed with that much metal...I anticipate something failed. |
https://cimg6.ibsrv.net/gimg/www.off...c5b757d5b.jpeg
I bet you find something like this on a tooth or couple, I’ve had failures like this at your timeframe, some last 75ish hours, some last 200 hours, with no rhyme or reason for it, I just chalk it up to poor quality from mother mercury |
Originally Posted by JaayTeee
(Post 4752148)
They can fail behind 500EFI’s. we had a 2 hour ride back in 100* temps @ the GLOC poker run several years ago when my buddy’s boat had a gear tooth shear and pushed the pinion set out the front of the case.
With that much material on the magnet, it looks like a gear failure to me, I’ve seen this several times.
Originally Posted by 1MOSES1
(Post 4752164)
10-12 hours on break in oil (merc hi performance green)
replaced with neo oil 30 ish hours on this neo oil. AADS recommends this oil can go all year without a change. Claims 40-60 hours. the other drive oil looks brand new. |
| All times are GMT -5. The time now is 06:08 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.