Shift Rod Height Measurement
#1
Fast Singles Club
Gold Member
Thread Starter
iTrader: (8)
Shift Rod Height Measurement
1984 Johnson 150 Model # J150STLCRD
I can't seem to find accurate information anywhere or even an old used Shop Manuel for this engine. I'm not a close enough kind of guy and removing the lower on this old girl is a royal pain. Getting on the shift rod pin includes removing the bottom carbs and even at that it's very difficult to even see or get a tool on. So I want to do it once and do it right. I'd really appreciate if someone could help a brother out with this info. So far people have told me three different measurements, 22 1/16......21 1/16.....and 21 15/16 wtf????? Thanks, deep
I can't seem to find accurate information anywhere or even an old used Shop Manuel for this engine. I'm not a close enough kind of guy and removing the lower on this old girl is a royal pain. Getting on the shift rod pin includes removing the bottom carbs and even at that it's very difficult to even see or get a tool on. So I want to do it once and do it right. I'd really appreciate if someone could help a brother out with this info. So far people have told me three different measurements, 22 1/16......21 1/16.....and 21 15/16 wtf????? Thanks, deep
#2
Registered
iTrader: (1)
Can't help you specifically, but can with my searching skills.
Found service manual I believe
https://www.outboardbooks.com/manual/J150TLCR/Johnson/
Found service manual I believe
https://www.outboardbooks.com/manual/J150TLCR/Johnson/
#3
Registered
iTrader: (1)
May have found you a free version.
See if this covers it:
https://www.scribd.com/document/3253...-PN-394607-pdf
See if this covers it:
https://www.scribd.com/document/3253...-PN-394607-pdf
#4
Registered
iTrader: (1)
Found one on ebay for $20.00
Part # for manual is Johnson 394607
Part # for manual is Johnson 394607
#5
Fast Singles Club
Gold Member
Thread Starter
iTrader: (8)
Thank you for your efforts SB. I've been through ebay and amazon and have found nothing specifically for this 1984 20" shaft V6. Model J150STLCRD to be exact. Called a local marina who've been around for many years and they gave me a fourth measurement of 22 1/8 +- . Hoping someone can verify for me.
The following users liked this post:
SB (08-05-2020)