Arneson Drive Rebuild- Anyone Interested?
#1
Arneson Drive Rebuild- Anyone Interested?
It has been 15 years & 2000 Hours since my Arneson ASD #8 drives have had anything done except oil changes and a prop shaft seal.
This year we plan to drop the drives, put in complete U-Joint Assemblies, Seals, New Boots/clamps
, & Bearings (if needed). If anybody is interested in watching, I would be glad to have one of the guys photograph or video some of the process.
It might be best to drop me an email to [email protected], as I dont check the internet that much
This year we plan to drop the drives, put in complete U-Joint Assemblies, Seals, New Boots/clamps
, & Bearings (if needed). If anybody is interested in watching, I would be glad to have one of the guys photograph or video some of the process.
It might be best to drop me an email to [email protected], as I dont check the internet that much
The following 6 users liked this post by pizzacuttter:
Dean Ferry (01-24-2022), I'CE (12-01-2021), KNOT-RIGHT (01-20-2022), speicher lane (01-20-2022), sutphen 30 (01-20-2022), Wally (01-21-2022)
#2
Registered
im curious on the diameter of the thrust ball /socket under that boot!
I sent a email.
2000 hours is pretty impressive!
I sent a email.
2000 hours is pretty impressive!
#3
Registered
Setup a go pro or Wyze or iphone and do a timelapse for us watching from home.
If you were close to me, would love to watch in person.
If you were close to me, would love to watch in person.
#4
Ok guys will try to get pics/video. Also got email about ball size. will get that measurement for U. Unfortunately, I am waiting on parts from Rik @ Arneson. Hoping for the best on that subject.
These drives have been nearly trouble free for along time (So have the Cat Diesels)
Sabre, not sure where U R in Pa, but we are in Ocean City, MD, so maybe not too far. We have a small rental apartment above garage, if u wanna come down some time
These drives have been nearly trouble free for along time (So have the Cat Diesels)
Sabre, not sure where U R in Pa, but we are in Ocean City, MD, so maybe not too far. We have a small rental apartment above garage, if u wanna come down some time
The following 7 users liked this post by pizzacuttter:
Dean Ferry (01-24-2022), Gimme Fuel (01-27-2022), IGetWet (01-26-2022), KNOT-RIGHT (02-17-2022), rak rua (01-25-2022), SB (01-24-2022), scippy (01-24-2022)
The following users liked this post:
rak rua (01-25-2022)
#7
Registered
Pizzacutter - If there is a delay with Rik getting the parts, you can try Twin Disk as I believe that they are building the ASD8's and larger, and may be where your parts originate anyways....
https://twindisc.com/products/asd08/
https://twindisc.com/products/asd08/
The following users liked this post:
Dean Ferry (01-25-2022)
#8
Thx for twindisc link . Rik has promised parts soon, so I will wait a bit. I would add that Rik has been supplying me parts for 30 years and service has been outstanding. This order is running late, but so is a lot of stuff these days. Keeping fingers crossed.
The Boat is 1987 42' Harley. Twin Caterpillar 3126/Arneson ASD #8. Have owned the boat for 30 years (repowered twice) . Rarely miss a day boating because of mechanical issues. Get 1 KMPG all days long
The Boat is 1987 42' Harley. Twin Caterpillar 3126/Arneson ASD #8. Have owned the boat for 30 years (repowered twice) . Rarely miss a day boating because of mechanical issues. Get 1 KMPG all days long
The following 7 users liked this post by pizzacuttter:
Dean Ferry (01-26-2022), Gimme Fuel (01-27-2022), Padraig (01-27-2022), SB (01-26-2022), scippy (01-27-2022), Steve H (02-01-2022), ThisIsLivin (01-31-2022)
#9
Charter Member
Charter Member
Thx for twindisc link . Rik has promised parts soon, so I will wait a bit. I would add that Rik has been supplying me parts for 30 years and service has been outstanding. This order is running late, but so is a lot of stuff these days. Keeping fingers crossed.
The Boat is 1987 42' Harley. Twin Caterpillar 3126/Arneson ASD #8. Have owned the boat for 30 years (repowered twice) . Rarely miss a day boating because of mechanical issues. Get 1 KMPG all days long
The Boat is 1987 42' Harley. Twin Caterpillar 3126/Arneson ASD #8. Have owned the boat for 30 years (repowered twice) . Rarely miss a day boating because of mechanical issues. Get 1 KMPG all days long
Very sweet set-up you have there! What transmissions are in it? Thinking about going the diesel/ASD8 route myself....
Tx.
Skater Dean
__________________
Everything is for sale @ a certain $$
Everything is for sale @ a certain $$