I just ordered a new anode for my Bravo XR drive that sits behind the prop. Pulled the prop off this past weekend and the anode fell out of the prop and was completely snapped off. I was able to remove the snapped bolts, but my new anode didnt come with any hardware. Does anyone have their drive handy and could get me a measurement on length of the bolt? I am going to need to purchase some from a hardware store. Im assuming stainless?

my spare XR's dont have them, Id just measure the thickness of the part and ad a 1/4 inch

I believe #36 and #37.
It tells you bolt size. :thumbs

https://www.mercruiserparts.com/bam/...0991/11406/150

btw: 95% of the time you need a bolt/screw/nut etc, this BAM lookup site lists the size

Thanks a ton! I was looking at these sites on my phone and was not able to find it there.. Noted to look at these sites on the computer instead lol.

What's the other anodes look like?
Whole kit comes with new fasteners.
Bravo One Aluminum Anode Kit (boatzincs.com)
Bravo One Magnesium Anode Kit (boatzincs.com)

Good point.
OE kit does also.
https://www.mercruiserparts.com/888758q02-anode-kit

Yes sir. Just hate to see someone pay double for something negligible as anodes.