neil450

how do i contact them is ther a # or web site thanks

offshoredrillin

call my cell 410-746-0020 I have a brand new set of 27's never been on a shaft. the 31's I am using.

vette131

has anyone tried a bh on a 26 american offshore, eliminator cat, etc?

Boat Tech

This is kind of old now, But in his web site it shows he has 29 pitched blackhawk props in stock, Might be worth a call you never know. Good luck. http://www.thepropellercompany.com/


vette131, If you do a search on Blackhawks either here on [OSO] or over on Performance boats forums you will find some good information about running blackhawks.

Also if anyone needs some information about wanting to buy a used Blackhawk drive, I know of someone that has a few to sell. You can "PM" me and I will give you his number if you want, He has no props though.

offshoredrillin

sean/airpacker had one on a cat, forget which make and it ran well until he exceeded its hp limit. up until that point he really liked it.

GLH

Get a couple strippers together and offshoredrillin will certainly call you...

glassdave

iTrader: (1)

we tried one on a twenty something foot Eliminator cat (24-25?) with pretty good results. The boat was slugish at first and would only hit about sixty at like 4000rpm. Hit the trim and it shot to eighty plus like a bullet, pulled real hard up to speed. Tells me we need to ad some X to the boat but other wise happy with results. Its a great drive but takes some tuning. If you want an alternative Anthony with Wazzup racing in NJ was telling me he believes he can assemble a better variant using XR uppers, an Imco shorty lower case and BravoIII internals.

neil450

thanks for the info i have brand new labed 27p by bronson hill i am runing 22ft daytona 509efi 560 hp an just under 90mph its blowing the props off so i was trying to get a hold of 29 or 31 to see if 100mph possible

BY U BOY

has anyone ever converted a BH to a single prop?

Airpacker

Yes, there was a kit available from I don't remember who that converted it to a single SSM style prop shaft.

Why you would want to reduce the efficiency of the drive though I am not sure.