|
Looking at that service manual description, I'm betting the wires are buried in the harness somewhere.
On a side note, not sure if anyone has ever tested this with Smartcraft, but there is a stand alone CAN output fuel sender available now. It plugs into the data network and sends a fuel level via J1939 to nodes on the network. http://www.capnavi.com/en/shop/showproduct/12/ I found those units available on another site for about $100 |
Thats my engine!
|
Originally Posted by kidturbo
(Post 4120280)
Looking at that service manual description, I'm betting the wires are buried in the harness somewhere.
On a side note, not sure if anyone has ever tested this with Smartcraft, but there is a stand alone CAN output fuel sender available now. It plugs into the data network and sends a fuel level via J1939 to nodes on the network. http://www.capnavi.com/en/shop/showproduct/12/ I found those units available on another site for about $100 But can anyone tell me if it works? |
found that cable! Thanks alot!
|
| All times are GMT -5. The time now is 02:51 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.