Merc. gen 6 502 injector wire sequence
08-07-2019 | 05:18 PM
#1
Thread Starter
Registered
Joined: Jun 2015
Posts: 77
Likes: 0
From: Charlotte
Merc. gen 6 502 injector wire sequence
I am confused on what injector plugs go to which cylinder? I have pulled some wire diagrams and my wiring colors don’t seem to match up. I attached a few pictures if anyone know what plugs go to which cylinder that would be great. 
10-20-2019 | 07:17 PM
#4
Registered
Joined: Nov 2009
Posts: 4,198
Likes: 500
From: KY
They are batch fired, and so far as when, according to articfriends (smitty) it makes no difference when each one is being fired. The list above is for the Gen V block and the Gen VI is how you have it listed
10-21-2019 | 07:28 PM
#5
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 45
From: Ft. Worth TX
Dodge has it right and they are batch fired or some even call it bank to bank as well. There is 2 injector drivers inside the ecm and the injector driver fires 1 4 6 7 and the other injector driver fires 2 3 5 8. But that does not hold true for the L 29 454 and 350 HO mag that fires differently the injectors -- it still is batched fired thou
Again Dodge has it correct in the lay out. exactly
Again Dodge has it correct in the lay out. exactly
10-21-2019 | 08:46 PM
#7
Registered
Joined: Nov 2009
Posts: 4,198
Likes: 500
From: KY
