Offshoreonly.com - daytona sensors Coil mount

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Electronics (https://www.offshoreonly.com/forums/electronics-291/)

- - daytona sensors Coil mount (https://www.offshoreonly.com/forums/electronics/377361-daytona-sensors-coil-mount.html)

chancer540

10-13-2022 12:13 PM

https://cimg7.ibsrv.net/gimg/www.off...53809ba7fb.png
This is how our coil is mounted to our ignition box bracket

seafordguy

10-13-2022 07:39 PM

Quote:

Originally Posted by SABER28 (Post 4848052)

the problem with mounting that ignition box vertically is that those little rubber isolators are not designed to support that much weight especially the pounding a boat takes.

Hadn't thought of that. Been a couple seasons but I'm going to check them. Luckily I'm a fair weather boater that drives like a grandmother....

ThisIsLivin

10-14-2022 08:31 AM

I mounted my box on the transom so it wouldn't have to endure the engine vibration and put the coil on a plate that had my old MSD coil on the back of the even bank cylinder head. 3rd season and no issues.

Rookie

10-15-2022 11:42 AM

I mounted my box and coil on the transom. This is where they will see less impact and jarring. Same place I mounted my ECU's now that I went with EFI.

https://cimg3.ibsrv.net/gimg/www.off...8e7e6dbfdf.jpg

All times are GMT -5. The time now is 07:27 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page