Post a pic of your Eliminator...
#41
Originally Posted by Harper220
I had a 22 Eagle xp and I had the same problem. More than likely, the water is coming from your bilge. When the boat is in the water the transom sets lower from the weight of the engine, so any water in the bilge stays in the bilge. When you pull the boat out of the water without draining it on the ramp and then get the boat level or even slightly down hill the water from the bilge runs the center v all the way up to the cabin "via a little tube" and then you have standing water or wet carpet. The ski locker always gets wet also if you hadn't all ready noticed. It's just the way the boat was built, so you must drain on the ramp every time you pull out or this will happen. Or you can plug the little tube with a cork or something, but then when you get water in the boat it won't drain through to the bilge.
I have plugged both of the weep holes before i pulled it out of the water. And i have drained the bilge while on the ramp. It dosen't seem to help. It is a little more than a moiste carpet. it is like 14 gallons of water. I know this because i take a shop vac and clean it after every time i come home. It seems magical but i know it is just something i havent found yet. Also i am wondering what this is doing to my top speed? I thought of the pedo tube but i unplugged it and it still happens!!
#42
Originally Posted by hpy540
I have plugged both of the weep holes before i pulled it out of the water. And i have drained the bilge while on the ramp. It dosen't seem to help. It is a little more than a moiste carpet. it is like 14 gallons of water. I know this because i take a shop vac and clean it after every time i come home. It seems magical but i know it is just something i havent found yet. Also i am wondering what this is doing to my top speed? I thought of the pedo tube but i unplugged it and it still happens!!
#47
Registered
Joined: Nov 2003
Posts: 262
Likes: 0
From: Fife washingtont
#49
Not mine, It's my clients... 1990 21' Daytona . Blown 454. Its for sale too! He wants a bigger "E" with a sterndrive...
If anyones interested in her you can reach us through our site below...
Eliminator sure does build a great boat!
Jamie www.LakesideRestorations.com
If anyones interested in her you can reach us through our site below...
Eliminator sure does build a great boat!
Jamie www.LakesideRestorations.com
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]



