Schuemann
03-28-2008 | 12:00 AM
#1
Thread Starter
Registered
Joined: Mar 2008
Posts: 183
Likes: 0
From: Tulsa, OK
Schuemann
Just took delivery of my 1995 eagle 25 (525sc) from you guys yesterday. And, my 24 inch dana tabs arrived here also.
My question is, who there would be able to tell me exactly where to mount the tabs, and do I have to cut an access hole under the diamond plate or something to get to the backside? I'm assuming you must, cuz there would be no other way to do this?
Thanks,
Mike
My question is, who there would be able to tell me exactly where to mount the tabs, and do I have to cut an access hole under the diamond plate or something to get to the backside? I'm assuming you must, cuz there would be no other way to do this?
Thanks,
Mike
03-28-2008 | 12:15 AM
#2
Registered User
Joined: Jul 2007
Posts: 859
Likes: 0
From: Alta Loma, CA
Just took delivery of my 1995 eagle 25 (525sc) from you guys yesterday. And, my 24 inch dana tabs arrived here also.
My question is, who there would be able to tell me exactly where to mount the tabs, and do I have to cut an access hole under the diamond plate or something to get to the backside? I'm assuming you must, cuz there would be no other way to do this?
Thanks,
Mike
My question is, who there would be able to tell me exactly where to mount the tabs, and do I have to cut an access hole under the diamond plate or something to get to the backside? I'm assuming you must, cuz there would be no other way to do this?
Thanks,
Mike
