Elims with Surface Drives?
#1
I'm going through a drive change right now and found it curious that I haven't seen much noise around Elims with Surface Drives (ie. Arnesons).
Being that these boats are often set up with high x-dims, why haven't I seen nor heard about many Elims set up w/Arnesons?
What's the down side?
Being that these boats are often set up with high x-dims, why haven't I seen nor heard about many Elims set up w/Arnesons?
What's the down side?
#3
I'm going through a drive change right now and found it curious that I haven't seen much noise around Elims with Surface Drives (ie. Arnesons).
Being that these boats are often set up with high x-dims, why haven't I seen nor heard about many Elims set up w/Arnesons?
What's the down side?
Being that these boats are often set up with high x-dims, why haven't I seen nor heard about many Elims set up w/Arnesons?
What's the down side?
Talk to Rik at Arneson to get the correct info and set up
415-485-0788
#4
I can definitely fly the nose easier running into the wind - but am also trying some different props. Have some new Herrings waiting to try this weekend too - wanting to see if they give me a bit more lift...
#7
So, the drives are my weakest link right now and am hopefully getting that addressed. Elim worked with me to upgrade me to the Teagues (I love these guys!).
So, this week, I'll splash with those new drives and run some 4 blade props for 10 hrs and change the drive oil to see how we look
#8
Based on hours of research, I am hopeful that the Teagues with some 4 blade Herrings will provide me some much better luck.
If not, I think I'll be persuing the NXT route.
#10





