27 Daytons w/IMCO extension Box
 

Considering adding an IMCO extension Box to my 07 27 Daytona ICC. Has anyone had any experience with them do they help or is it even worth it? I have 900hp motor 2" Shorty but I had to install a 1" spacer to help get the boat on plane..

Thanks

Just my opinion, but from what ive been told and read over the years on IMCO ext boxes, they arent met to help the Cat up on plane,, and really not necessary on single I/O cats... I asked an Eliminator rigger this question years back for a 25 Cat, and he told me to "save my money", I didnt need it....From what im told, the IMCO ext box sets the prop back allowing you to pick up "top end speed" due to the prop being pushed back "into calmer, less distrubed water", but had nothing to do with the Cat getting up onto plane..... idk?

Plus, it was a very expensive proccess,,, so make sure you wanna do it first......

It does look good "cosmetically" and looks blingy,,, but is it worth all that work/money? .. idk
the plane problem seems like a drive issue,, the lower skag to high, or the drive mounted too high.... or the pitch on the prop may need to be lowered... idk

anyone?:drink:

Where is your prop shaft compared to the outside sponsons? I have a standoff box, prop is 1/2" above sponson and have no problem getting on plane.

Imco
 

My 28 has them. Some pictures
Attachment 438511

Attachment 438512

Attachment 438513

Im 1/2 below the sponson.

As I have stated I have no problem getting going & my prop is 1" higher. When I run a bravo 4 bade, unless I am runnin over 35 the boat will slow down with motor keeping same speed. When I have 5 blade on, no problem anywhere

Thats with a box and 2" shorty?

yep

Save your money.....Its not gonna help you get onto plane...
you have other issues.... IMCO standoff box NOT the solution.