Could this be a Excalibur from the 70s
07-28-2007 | 09:21 AM
#14
Registered
Joined: May 2006
Posts: 27
Likes: 0
From: New Port Richey, FL
I have pics before I started the restoration in the classic offshore forum under post your old school rides. page 30 number 596. It's since these pics got a new transom, engine bedders, regelcoated bottom, and is almost ready for the first coat of primer. I have a bravo 1 and a mildly built 454 going in it.
09-27-2009 | 05:05 PM
#15
Registered
Joined: Sep 2009
Posts: 11
Likes: 1
All the 24' Eacalibur HID #s were in the upper right hand conor of the transom just under the roll of the hull all started with nap....... The first 24 was named " THE SPIRIT OF '76 " ......... I was insurmentral in building it ...... Thanks, Vince ......Bradenton Fl.
09-27-2009 | 05:08 PM
#16
Registered
Joined: Sep 2009
Posts: 11
Likes: 1
All the 24' Eacalibur HID #s were in the upper right hand conor of the transom just under the roll of the hull all started with nap....... and all were done with a dremmel tool,by hand... the hid # was not put in the mold as it was later on......The first 24 was named " THE SPIRIT OF '76 " ......... I was insurmentral in building it ...... Thanks, Vince ......Bradenton Fl.
