Excalibur Molds ?
03-22-2008 | 02:17 PM
#1
Thread Starter
Registered User
Joined: Oct 2004
Posts: 157
Likes: 2
From: Pasadena, Md.
Excalibur Molds ?
Does anyone know if any boat manufacturer is using the old molds for the 27 Speedster or the 31 ? Just curious, especially the 27 Speedster.....great hull....always reminded me of a popcicle stick in the water.
01-12-2009 | 09:39 PM
#5
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
There is a big diffrents beetween the real Excalibur and the Wellcraft Excalibur !!!!!
The realones where only 24-27 and 32 and 38, NO 31
Wellcraft and Chriscraft and Fountain modyfied that hull for the 31's.
Aero-Tek used the original Hull .
Good Boats though,,,all of them.
The realones where only 24-27 and 32 and 38, NO 31
Wellcraft and Chriscraft and Fountain modyfied that hull for the 31's.
Aero-Tek used the original Hull .
Good Boats though,,,all of them.
01-12-2009 | 11:34 PM
#6
Registered
Joined: Oct 2001
Posts: 513
Likes: 1
From: North Channel, Lake St. Clair. MI.
There is a big diffrents beetween the real Excalibur and the Wellcraft Excalibur !!!!!
The realones where only 24-27 and 32 and 38, NO 31
Wellcraft and Chriscraft and Fountain modyfied that hull for the 31's.
Aero-Tek used the original Hull .
Good Boats though,,,all of them.
The realones where only 24-27 and 32 and 38, NO 31
Wellcraft and Chriscraft and Fountain modyfied that hull for the 31's.
Aero-Tek used the original Hull .
Good Boats though,,,all of them.
01-13-2009 | 07:27 AM
#7
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
Sorry your right, These are the AERO / PREDATOR molds from michigan which came from Farmers Excalibers built in sarasota which is the same mold Reggie dropped the sheet of plywood in to make his pad I also have the 24' hull and 27' that was aquired in the purchase .The 27' is not of the Excaliber though it's of a magnum.
U should keep it. I will PM u why.
Thread
Thread Starter
Forum
Replies
Last Post
GDM
General Boating Discussion
31
09-17-2008 02:10 PM
