40 Excalibur Project with new 650's
#1
40 Excalibur Project with new 650's
Here are a couple pictures of my friends 40 Excalibur. He had over 750 original hours on it, mostly saltwater. The original Merc 400's had never been out of the boat. They actually had to cut one out. The boat then had a new fuel tank installed, repainted the bilge, replaced or rebuilt all running hardware, replaced all hydraulics, etc. The new power is Derebery 540ci 650's. Texoma Marine Gear beefed up the transmissions. We hope the best for the drives. Derebery did a great job on all the new rigging. If CMI will get the tailpipes delivered this one will be on the water.
#4
Original paint! I guess this was the deal back then? The owner of this boat bought my boat new. It was stolen from him in the mid 80's in Sarasota. Insurance bought him this one.
Here is a picture of mine before the redo, the 11:3 ratio should clear up any doubt.
Here is a picture of mine before the redo, the 11:3 ratio should clear up any doubt.
#6
Registered
Join Date: Aug 2004
Location: FORTLAUDERDALE, FLORIDA
Posts: 4,229
Likes: 0
Received 0 Likes
on
0 Posts
Here are a couple pictures of my friends 40 Excalibur. He had over 750 original hours on it, mostly saltwater. The original Merc 400's had never been out of the boat. They actually had to cut one out. The boat then had a new fuel tank installed, repainted the bilge, replaced or rebuilt all running hardware, replaced all hydraulics, etc. The new power is Derebery 540ci 650's. Texoma Marine Gear beefed up the transmissions. We hope the best for the drives. Derebery did a great job on all the new rigging. If CMI will get the tailpipes delivered this one will be on the water.
Last edited by spk1; 08-25-2008 at 09:24 PM.
#7
Registered
I had a chance to see this boat when they were doing the rigging. Looks real nice.
#10
Registered
Sounded good.....